— February 26, 2021
Taiyo will be presenting during the Exhibitors New Product Presentations on March 9, 2021 at 11AM and again at 4PM PST where and will be revealing three new major innovations in solder mask production that are guaranteed to solve your thermal management issues as well as significantly reduce excess waste caused by traditional solder mask application.
— February 8, 2021
When it comes to printed circuit boards (PCBs), the Aerospace industry always demands the highest technical performance, reliability, and extreme environmental tolerance. Taiyo's solder mask continues to meet each of these requirements.
— February 8, 2021
John Fix gives the readers insight in to what to except from Taiyo-America in 2021
— February 8, 2021
At Taiyo America we make Solder mask. Solder mask goes on circuits boards and circuit boards go into cars; a lot of circuit boards go into cars these days. Years ago, not many boards were used for the automotive industry. Back in the day, I lived and breathed cars, spending many hours “under the hood” rebuilding engines, doing brake jobs or any other repair that could be accomplished in the driveway.
— February 8, 2021
Chris Kalmus has been in the PCB industry so long there barely was an industry when he started. Always an outspoken advocate (and sometimes critic) or our industry, Dan Beauleiu thought it would be fun to have a chat with Chris and get his thoughts about the current state of our business.
— February 8, 2021
To understand the evolution of the flexible printed circuit board, one must look more closely at the evolution of electricity. What is interesting here is that before the printed circuit board became rigid, the vast majority of carrier materials for wires and circuits were flexible.
Nov 1, 2017
Dr. Yuya Suzuki has been named to the position of IC Packaging Marketing Manager.
Oct 18, 2017
Taiyo America Inc. has recently appointed Sang Lam to the position of technical service engineer. Sang comes to Taiyo with sixteen years of industrial experience (13 years laboratory and 3 years business) with about half of those laboratory years in liquid crystal and polymer formulations.
Oct 6, 2017
This expansion is the first step in Taiyo’s plans to expand technical support and new business development.
Mar 17, 2017
In an interview published in The PCB Magazine, John Fix talks about his company’s newest direct image and thermal management solder masks.
Oct 10, 2016
Linda Merrell is retiring after 22 years in customer service with Taiyo America. Introducing: Alyssa Orellana.
Jun 7, 2016
Effective June 6, 2016, Taiyo America Inc.’s Director & COO Tadahiko Hanada has been promoted to the position of President and Director.
Mar 7, 2016
In 2007, the United States passed legislation to phase out the manufacture and trade of incandescent light bulbs, the EU following passed similar legislation in 2009. The rest of the world has been following suit creating a huge opening in the lighting market for a technology to fill the gap.
Jan 5, 2016
Taiyo America’s Josh Goldberg spent a few minutes with I-Connect007's Pete Starkey at productronica recently for this interview where the discussion explored the broader market for high-performance polymer coatings in the electronics industry.
Jul 22, 2015
Taiyo America, Inc. announced that the company has promoted Tadahiko Hanada to Director & COO, effective July 1, 2015.